Do you know about these three wire feedders for welding robots?
- 分类:鹏聚资讯
- Release time:2024-04-10
- Visits:0
The coming of welding robots has not only brought great convenience to the user's welding process, but also improved the welding efficiency and ensured the safety of the welders. Today we are going to learn about these three types of wire feeding systems for used welding robots, and the following company that does used robots, Changsha Pengju Roboticsin in China. let's move on to learn more about them. Translated with www.DeepL.com/Translator (free version)
The coming of welding robots has not only brought great convenience to the user's welding process, but also improved the welding efficiency and ensured the safety of the welders. Today we are going to learn about these three types of wire feeding systems for used welding robots, and the following company that does used robots, Changsha Pengju Roboticsin in China. let's move on to learn more about them.
The wire feeder of a used welding robot can be fed in three different ways. One type of wire feeding is a pull type, which separates the wire tray from the welding gun, making the two connected by a wire feeding hose. The other is to mount the wire tray directly to the torch. Both of them are suitable for semi-automatic fusion electrode gas shielded welding with a wire diameter less than or equal to 0.8 mm and a more stable wire feed.
The other is the push wire type, such a structure is relatively simple, lightweight, easy to operate and maintain, but is the resistance of the wire feed into the larger, with the wire feed hose lengthening, the wire feed stability becomes worse. Therefore, this type of wire feeding method is usually used in the wire diameter of 2.0mm, the length of the wire feeding hose for 5m semi-automatic melting gas shielded welding.
There is also a push-pull wire feeding method, which is also the working method used in the wire feeding system of the welding robot. This type of wire feeding system has both a wire pusher and a wire puller, in which the wire pusher is the main power and the wire puller is to straighten the wire. Although its wire feeding hose can be lengthened to 10m, it is not used much in practice because of its complicated structure.
Since wire feeding is an essential part of the welding process, it should be handled properly, and this aspect should be taken into account when designing the welding robot so that the wire feeding system meets the actual welding requirements.
We hope this article will be helpful to you, and if you need used welding robots, you can find used robots company Pengju Robotics from Changsha, China. For more information, please contact us.
Message
WRITE A MESSAGE TO US
All rights reserved: changsha to get together robot technology co., LTD. | changsha peng peng robot manufacturers, accessories sales, installation and debugging, maintenance, rental prices ICP:湘ICP备2021004635号